How to Remove Old Kitchen Faucets | A Simple Process for DIYers

How to Remove Old Kitchen Faucets | A Simple Process for DIYers

blog / January, 2024

If you are replacing a kitchen faucet, the first step is to remove it. This can be a simple and quick process, or in some cases, it can be quite difficult. In any case, taking out a kitchen faucet can be made simpler and far less annoying if you're prepared. The steps below demonstrate how to take out a kitchen faucet and get ready to install a new one. It doesn't have to be difficult to remove a kitchen faucet if you have the correct equipment and advice. In this article, we are going to see how to remove old kitchen faucets.



Why You Need to Remove Old Kitchen Faucets?


The only challenging part of installing a new faucet is taking out the old one. The mounting nuts holding your old faucet in place can be frozen in place if it has been there for a long time. Additionally, the faucet connections are typically hidden beneath the sink basin and high up inside base vanity cabinets, which can make the task challenging due to the small area and tight spaces.


But how to remove a kitchen faucet? Removing flexible supply tubing and unscrewing mounting nuts that are threaded onto faucet tailpieces up under the sink are the two main steps in the removal of most faucets. Among contemporary faucets, this type—also referred to as a deck-mount or top-mount faucet—is the most widely used.


Another kind of faucet is located beneath the sink and has a brass faucet body with tailpieces for the spout and valve that extend through holes in the sink and are fastened by mounting nuts that are threaded down onto them from above. Although this style is becoming less common, if your faucet is very old, it can still have this design. Typically, these faucets fall into the bathroom or basin faucet categories.


How to Remove a Kitchen Faucet



What You'll Need to Remove Old Kitchen Faucets


Do not be fooled by the hidden hardware if you have never removed a kitchen faucet before. Even if the fittings may be difficult to reach and the cabinet is dark, a do-it-yourselfer can certainly complete this task. A little knowledge and the appropriate equipment will suffice. Here are what you'll need to remove old kitchen faucets:




  • Bucket

  • Channel-type pliers or adjustable wrenches

  • Basin wrench

  • Penetrating oil spray (WD-40 or similar)


Related Link: Smart Toilet

How to Remove Top Mount Old Kitchen Faucets


The majority of faucets have top-mount designs, where the chromed outer casing covers the brass faucet body, which rests primarily above the sink. It's not as difficult as it might seem to remove a kitchen faucet. You will be guided through the procedure by the stages that follow. Your light will help you see what you're doing beneath the cabinet, and wearing safety glasses will ensure that you're shielding your eyes from falling debris and buildup. We'll walk you through the process of taking out outdated kitchen faucets below.


Step 1: Spray with Penetrating Oil


The first thing you should know about removing outdated kitchen faucets is that high humidity levels inside cabinets and perspiring pipes can cause materials to stick. You should spray penetrating oil in the following places while wearing safety glasses:




  • Both ends of the supply lines (at the shut-off valves and the faucet)

  • Both ends of the sprayer hose

  • The large nuts holding the faucet to the sink


Related Link: Bidet Toilet

Removing kitchen sink faucet


Step 2: Turn off the Water


Turning off the water supply is necessary before removing a kitchen faucet. Activate the faucet by turning on the hot and cold water simultaneously. To close the shut-off valve, reach into the cabinet underneath and crank it clockwise. When the water stops flowing a few seconds after the valve is closed, you will know it is closed. If your system has two shut-off valves, you will need to close both of them. You will need to replace the shut-off valve under the sink and turn off the water supply to the house if the valve is closed but the water still runs. Next, switch on the hot and cold water at the kitchen faucet to confirm that the water is off. The faucet shouldn't be spitting water at all.


Step 3: Remove Supply Lines


You must unplug the faucet from the water shut-off valves to remove it. You should replace these hoses regardless unless they're quite new. To extract the brass nuts from the valve, turn them counterclockwise with your 6-inch adjustable wrench.


It is usually a good idea to support the shut-off valve with your hand or a pair of tongue-and-groove pliers if the pipes or shut-off valves are older. This will stop you from overtightening pipes that aren't as strong. Additionally, you can use the pliers to hold the hose as you twist the nut with the wrench if the braided hoses are twisting and making it difficult for you to remove the brass nuts.


Why You Need to Remove Old Kitchen Faucets?


Although it can make the task considerably easier, disconnecting the supply lines from the faucet is not necessary to remove it. The process is essentially the same, however, to reach the brass nuts behind the sink, you might need to use the basin wrench.


Related Link: LED Mirror

Step 4: Disconnect the Sprayer


You will also need to unplug any spray attachment that may be attached to your kitchen faucet. Usually, the hoses include quick-connect fittings that attach to a fitting beneath the faucet with ease. To remove the hose fitting from the faucet, just pinch it.


Step 5: Remove Kitchen Faucet Mounting Nuts


You will have unhindered access to the large, flat mounting nuts that secure the faucet to the sink once the sprayer hose and supply lines are out of the way. Since they are frequently plastic, these nuts can be easily twisted counterclockwise to be removed by hand. If not, turn the nut counterclockwise with the basin wrench until it is loose enough to be removed by hand.


This procedure can be repeated using the sprayer attachment. Try holding the base with your free hand if it keeps spinning; if not, you may need to use your tongue-and-groove pliers to keep it in place.


Related Link: Buy Bathtub

What You'll Need to Remove Old Kitchen Faucets


Step 6: Pull the Faucet and Sprayer Up and Out


You are now able to remove your faucet after removing all of the mounting hardware. It may feel a little stuck if it has been there for a few years, but a little wiggle should be enough to get it out of the way. Most likely, you'll also discover that a plastic foundation was left behind. If you are going to reuse your faucet, you need to save this specific model's base, which fits beneath the faucet.


Step 7: Remove Kitchen Faucet Residue


When you remove the faucet, there is often some gunk and goo left behind after years of use. Most just wipe off, but for more tenacious accumulation, a little vinegar applied to a cloth typically works wonders. Hard water stains can be removed by soaking a towel in vinegar and applying it to the stain for 10 minutes before wiping it off. Continue doing this until the stain disappears.



How to Remove Old Bottom-Mount Kitchen Faucets


The majority of the faucet body of a bottom-mount faucet is located beneath the sink. To remove the faucet from above, you must first remove the handles and spout. After that, you must loosen and remove the mounting nuts. It is possible to drop down and remove the faucet body from beneath the sink after removing these mounting bolts.


Related Post: How to Repair Kitchen Faucets

How to Remove Top Mount Old Kitchen Faucets


Ensure the Water Is Shut Off


Make sure the water is off all the way. To catch any water that may spill as you work, place a bucket underneath the supply tube connectors. Turn off the water supply beneath the wall-mounted faucet. Take the Spout and Handles off. Remove the faucet's spout and valve handles by working from above. To keep the handle or handles in place, look for a hidden set screw. Sometimes the spout set screw is located beneath an escutcheon ring that can be lifted to reveal the screw.


Removed faucet handles from the sink deck valve. Remove the mounting nuts. The mounting nuts that secure the faucet body should be visible once the handles and escutcheon are removed. There might be nuts at the spout and both handle sites. To take out the mounting nuts, use channel-type pliers. If there is a spout mounting nut, do the same.


Remove Faucet Body


The faucet body can be taken out from under the sink. After the mounting nuts are removed, the faucet may occasionally fall off by itself; other times, you may need to give it a gentle pull to get it to release. To prevent damage to your cabinet or floor if the faucet assembly falls, it's a good idea to drape a thick towel underneath the faucet.


Don't be scared to disassemble the drain trap to free up additional space for working if it is too tough to reach behind it. Try again after applying penetrating oil and letting it sit for a few minutes if the mounting nuts are stubborn. Also, you might need to cut off the mounting nuts if they are stripped. A hacksaw or a specialized nut-splitter tool can be used for this.


Related Post: how long do kitchen faucets last

How to Remove Old Bottom-Mount Kitchen Faucets


You Can Have Golzar Home Remove Your Old Kitchen Faucets


We went over removing kitchen sink faucet here. You might wish to buy the replacement before starting the removal process so you have it ready to install right away. Being without a kitchen faucet is uncomfortable, to say the least, so having everything set to go after the faucet is removed will help minimize disruption during this project.


Golzar Home is one of the major companies that import bathroom and kitchen accessories in Canada. Here at Golzar Home, we offer high-quality products and services for your bathroom and kitchen. If you need to have your old kitchen faucets removed, please contact us today!